Casper

Product overview

For post-emergence control of certain broadleaf weeds in established turf.

CASPER Turf Herbicide is a clever combination of two active ingredients that together deliver more than either could in isolation. Prosulfuron is combined with dicamba to deliver highly effective control of many broadleaf weeds.

Registration

Classification and Security

Re-entry Period	DO NOT allow the general public to enter treated areas until the spray has dried. DO NOT allow entry into treated areas until the spray has dried for low exposure activities such as mowing, unless wearing cotton overalls buttoned to the neck and wrist (or equivalent clothing) and elbow-length chemical resistant gloves. DO NOT ALLOW entry into treated areas for 14 days for high exposure activities such as hand weeding or transplanting, unless wearing cotton overalls buttoned to the neck and wrist (or equivalent clothing) and elbow-length chemical resistant gloves. Clothing must be laundered after each day’s use.
Precautionary Statements	This product is a registered chemical and must, therefore, be used in accordance with the container label directions. Each user should read this SDS and consider the information in the context of how the product will be handled and used in the workplace including in conjunction with other products. FIRST AID Singapore: For 24-hours medical emergency assistance - Phone +65 6334 4366 or a doctor immediately.
Personal Protective Equipment	May irritate the eyes. Avoid contact with eyes. When using the prepared spray by low pressure hand wand, wear: - cotton overalls, over normal clothing, buttoned to the neck and wrist - a washable hat - elbow-length chemical resistant gloves - half face piece respirator If product gets in eyes, wash it out immediately with water. Wash hands after use. After each day’s use, wash gloves, contaminated clothing and respirator, if rubber, wash with detergent and warm water.

Application Advice

Tank mixing	CASPER mixes readily with water, no pre-mixing is required. This product must be mixed with water and applied by suitable spray equipment.
Tank mix preparation	1. Clean the spray tank before using. If it is contaminated with other materials, mixing problems and/or clogging may occur, or injury to the turf may result. 2. Fill tank no more than 25% full with clean water before adding CASPER. Begin agitating tank contents vigorously and continue agitation during entire mixing and spraying operation. 3. Pour required amount of CASPER steadily into tank. Allow vigorous bypass agitation to completely disperse product. 4. After adding required quantity of CASPER and obtaining complete dispersion, continue to fill tank to desired level for spraying. 5. Add required quantity of non-ionic surfactant if using and continue agitation. 6. Thorough agitation (preferably mechanical) of the spray liquid is essential during the addition of the product and during the entire spraying operation. Recirculate if left to stand. Note: Spray solution should NOT be left standing in the tank overnight.
Mixing and spraying	Good weed coverage with the spray mixture is essential for optimum weed control.
Water volume	Apply at a volume of 400 to 800 L water/ha. Higher volumes should be used for severe weed infestations and higher cut turf (>15 mm) to ensure adequate spray coverage. It is recommended that a non-ionic surfactant be added to the spray solution at a 0.25 to 0.5% v/v ratio.

Casper

Herbicide

Product overview

Minimum dose

Maximum total dose

Re-entry Period

Precautionary Statements

Personal Protective Equipment

Tank mixing

Tank mix preparation

Mixing and spraying

Water volume

Features:

Benefits:

Casper

Monument Liquid

Barricade

Barricade 65WG

Casper

Herbicide

Product overview

Registration

Classification and Security

Application Advice

Emergency

Features & Benefits

Links and Downloads

Related products