Primo Maxx II

Product overview

For the regulation of leaf and stem growth of grass species and as an aid in turf management.

Improved and innovative formulation.

PRIMO MAXX® II Turf growth regulator is a completely new formulation designed to meet the ever increasing regulatory hurdles and secure the long term future of this key management tool for turf managers. Users should continue to apply the rates they have always used and can be confident of achieving the same great results while applying less active ingredient.

Classification and Security

Re-entry Period	DO NOT enter treated areas until the spray has dried, unless wearing cotton overalls buttoned to the neck and wrist (or equivalent clothing) and chemical resistant gloves. Clothing must be laundered after each days use. DO NOT allow entry into treated are
Precautionary Statements	This product is a registered agricultural chemical and must, therefore, be used in accordance with the container label directions. Each user should read this SDS and consider the information in the context of how the product will be handled and used in the workplace including in conjunction with other products. FIRST AID AUSTRALIA: If poisoning occurs, contact a doctor or Poisons Information Centre. Phone 131 126. NEW ZEALAND: If poisoning occurs, contact the National Poisons Centre. Phone 0800 POISON (0800 764 766) or a doctor immediately.
Personal Protective Equipment	Please check SDS documentation.

Application Advice

Tank mixing	PRIMO MAXX® II is a soluble concentrate (SL) that mixes completely with water. It may be tank mixed with many commonly used fungicides and liquid fertilizers. Add the required quantity of PRIMO MAXX® II directly to a spray tank containing 1/2 of the required spray volume. Add the rest of the water and ensure the mix is thoroughly agitated before and during application.
Implementation particular terms	PRIMO MAXX® II should be applied to actively growing turf, at least 6 hours before or after mowing. Good mowing management leading up to application is required to achieve a good quality turf surface and to obtain the best results from PRIMO MAXX® II.
Mixing and spraying	PRIMO MAXX® II is compatible with a range of commonly used fungicides, insecticides, herbicides, fertilizers and pigments. PRIMO MAXX® II can be tank mixed with HERITAGE MAXX® Turf Fungicide, HEADWAY® MAXX Turf Fungicide, POSTERITY® Turf Fungicide, INSTRATA® Turf Fungicide, MEDALLION® Turf Fungicide, SUBDUE MAXX® Turf Fungicide, VELISTA® Turf Fungicide, BANNER MAXX® Turf Fungicide, DACONIL® WEATHER STIK® Turf Fungicide, CASPER® Turf Herbicide, MONUMENT® LIQUID Turf Herbicide, AGADOR® Turf Nematicide and Miticide, HIGRAN® Turf Miticide. However, as formulations of other manufacturers products are beyond the control of Syngenta, all mixtures should be tested prior to mixing commercial quantities.
Water volume	Apply in 100 to 500 L/ha water, using suitable flat fan nozzles. Application volume should be adequate to ensure thorough and even coverage of the turf leaves and penetration to the crowns. In higher cut turf (≥15 mm) a significant spray shielding effect can occur, impacting negatively on spray penetration and even coverage at low application volumes. Knapsack: It is important to apply the correct quantity of PRIMO MAXX® II to a known area of turf. Apply between 2 and 10 L water/100 m2 turf. Preferably use flat fan nozzles and ensure even coverage is achieved. Golf Courses and Bowling Greens: Ensure product placement as uniformly as possible onto leaves and into crowns. Ideal application volume should be 350 to 500 L/ha. For best results use medium to coarse droplet size with Syngenta XC025 or XC04 nozzles or equivalent nozzle. All Other Turf Areas: Ensure product placement as uniformly as possible onto leaves and into crowns. Ideal application volume should be 200 to 500 L/ha. For best results use medium to coarse droplet size with Syngenta XC025 or XC04 nozzles or equivalent nozzle. Bahia Grass Suppression and Seedhead Control: Ensure product placement as uniformly as possible onto leaves and into crowns. Ideal application volume should be 200 to 500 L/ha. For best results use medium to coarse droplet size with Syngenta XC025 or XC04 nozzles or equivalent nozzle. Non-ionic Surfactants: For Bahia Grass suppression and seedhead control when tank mixing with MONUMENT® Liquid, use Agral® (600 g ai/L) at 0.42% v/v or 420 mL/100 L spray mix. Use surfactants (1000 g ai/L formulations) at 0.25% v/v or 250 mL/100 L spray mix. Application Near and Around Monuments and Hardscape Materials: PRIMO MAXX® II, at normal dilution rates, will not stain brass, bronze, concrete, granite, marble or other types of stone. Before using PRIMO MAXX® II around other materials, test on a small scale basis first.

Primo Maxx II

Growth Regulator

Professional Turf

Product overview

Re-entry Period

Precautionary Statements

Personal Protective Equipment

Tank mixing

Implementation particular terms

Mixing and spraying

Water volume

Primo Maxx II

Professional Turf

Primo Maxx

Trimmit

Primo 250 EC

Primo HG

Primo Maxx II

Growth Regulator

Professional Turf

Product overview

Professional Turf

Related products